Bosch Airbag Reset Tool 1.0

Crash Data Reseter 1.0

VW airbag resseter tool 1.0.0.1
VW SIEMENS Airbag Tool 3.0 (Hardware + Software)

Autodata covers a number of subjects including:

Technical data, vehicle identification, service adjustments,
lubricants and capacities, ignition system, fuel system, tightening
torques, brake discs and brake drums, repair times, wheel alignment,
timing belts, timing chains and gears, tyre sizes and pressures,
service illustrations, service schedules, service interval indicators,
key programming, diagnostic trouble codes, engine management systems,
pin data, trouble shooter, airbags/SRS, air conditioning, ABS,
electrical component locations and wiring diagrams.

Note: No c*a*k needed! Everything works just fine, HDD and DVD load

Professional Diagnostics:

Coverage, coverage, coverage. In the professional repair
business getting as much coverage as you can get is important to
effectively and quickly service any vehicle. We offer manufacturer
specific options for BMW, Ford, GM, Chrysler, Toyota, Nissan, Hyundai,
Kia, Land Rover, Jaguar, Honda, Subaru, Porsche, Mitsubishi, Isuzu,
Audi/VW, and Mazda group vehicles. Get more done with a single scan
tool.

Clear your Check Engine or Service Engine Soon Light:
Did you know the average cost of having your vehicle’s
Check Engine or Service Engine Soon indicator cleared is $100? What if
the only thing wrong with your vehicle is that the gas cap is loose?
Don’t waste your time or money with simple code readers or hand-held
scanners when AutoEnginuity’s� OBD2 scan tool can read your codes and
show live data.

Tuning Your Vehicle:

Read live sensors such as wide-band O2 sensors, fuel
adaptation, MAF, ignition timing advance, and lambda readings. If your
vehicle supports wide-band O2 sensors, Scan Tool can show you real-time
air/fuel mixtures. Finally, data log them all in TXT, CSV, and XML
formats with 1ms sampling accuracy.

Emissions:

Did you know that almost all states are using OBD2-based
emission testing for all 1996 and newer passenger vehicles? If you have
a Check Engine or Service Engine Soon indicator illuminated, or a
specific inspection system monitor test fails, your vehicle will fail
its emissions test. With AutoEnginuity’s� OBD2 scan tool you can
inspect your vehicle�s compliance before you wait in line and pay for
the test.

Performance Analyzer:

Don’t buy into claims of increased horsepower or added
torque; you can verify whether that new, expensive part really works.
Do your own dynamometer and acceleration testing at your own
convenience and without having to rent expensive dynamometer time.

With AutoEnginuity’s� SpeedTracer you can measure:
AutoEnginuity’s ScanTool PC-based OBD2 Connector

* 0-60ft time

* 0-60 MPH
* 1/8 mile time

* 1/8 mile speed

* 1/4 mile time
* 1/4 mile speed

* G Forces

* SAE Horsepower
* Torque

* Boost Pressure

* SAE Horsepower and Torque vs RPM graphing
* Speed vs Time graphing

Best of all, SpeedTracer is free with every diagnostics scan tool purchase.

Note: Work with Autoenginuity OBD cable (original or cloned)

� Specification of ECU�s diagnostic data

� Reading and clearing error memory

� FLASH data uploading and downloading

� Reading measurement value

� Input/output control
� Calibration of single ECU variables

� Coding of ECU variables

� CAN (controller Area Network) bus mode emulation

� Integrated solutions for on-board/off-board

� Fast and simple configuration of GUI and communication data instead of programming

� Customer specific protocols supported

� Long term application by supporting widespread ASAM standards

� Language is English and German

INPA Models covered:

1 series  E87

3 series  E30 E36 E46 E90

5 series  E34 E39 E60 E61
6 series  E63 E64

7 series  E32 E38 E65 E66

8 series  E31 E52

Mini R50 R52 R53

X series  E53  E83
Rolls Royce

Z series E85 E52

Note: Works only with Carsoft BMW 6.5 interface (original or cloned)

Note: Works only with Carsoft MB 7.4 interface (original or cloned)

Audi MM 1.1

Audi VDO Crypto

DASH Calibration 1.0

Dashboard Mileage Corrector 1.0

Dashboard Mileage Corrector 1.10

EDC15 EEPROM TOOL 1.3

EDC15Calc 1.0
EDC16Calc

FabiaC86

Fiat, Renault & Mercedes Immo

Fiat KM Calibration 1.0

Ford KM Calculator 1.0

IMMOread 3.5.24.5

Licznik 9.02

Licznik USB 4.0
ME7 EDC15 EEPROM Reader 1.00

Mercedes Key Prog 1.11

Mini Calc

Nissan 2003

Opel Dash Board Tool 0.8

OPEL KM Calibration with NEC78082x by GOPEL

OPEL KM Calibration with NEC78082x

Passat with HC711KG2

Rocket MB Opel Manager 1.0

Skoda 93c86 Gopel Repair

TachoCalc 1.0

Toyota Dashboard Corrector 1.12

VAG DashTool

VAG EEPROM Programmer 1.18

VW Golf5 KM Calibration 1.0

VW Passat KmCalc 1.01

VAG K+CAN Commander 1.2 (Hardware + Software)
VAG-Prog (Hardware + Software)

VagTacho 1.7 & Opel Immo 1.0 (Hardware + Software)

Audi TT Beetle login reader II

BMW 35080 PROGRAMMER 3.0

Calculator For Opel 1.0

Chrysler KM-CHANGER Ver1.0
Dash Board VW Tool 1.0.1

DASH Calibration 2.0.17

Dashboard Calculator 1.0

Dashmater PRO Eeprommer 2.2

EWS K-LINE PROGRAMMER 1.0.0.1

FIAT Palio Calc

Ford KmCalc

Immobilizer 1.02

Japan ODO Programer 2.10 LITE
OdometerCalculator 2.0

Opel Scaner For Immo & Airbag.com

Renault Type 1 Converter

Tachopro 68HC912 Eprommer

Tipo

Toyota & Lexus Calc

VDO

VW Golf 3

VW Passat 1996-1998 Magnetti Marelli

VW Polo dashboard editor 0.1

VW-MTM16

Wincal 1.0

We are compatible with the ISO15765-4 (CAN), ISO14230-4 (KWP2000), ISO9141-2, J1850 VPW and the J1850 PWM protocols.

Features:

* Monitors general Obd-2 data: Fuel system
(open/closed loop status), Engine load, Coolant temperature, Manifold
Pressure, Engine Rpm, Vehicle speed, Timing advance, Intake air
temperature, Intake air flow rate, Throttle position, Secondary air
status.

* Multiple display modes; Digital, graph, or gauge style displays.
* Selectable units; Metric or English (U.S)

* Oxygen sensor Voltage / Current and Fuel trim plots. Works with conventional or wideband sensor types.

* On-board test results (also called Obd2 readiness);
Indicates whether each test category or subsystem test has been
completed (passed). Often used as a criterion in emission testing.

* On board tests (detailed report); Numeric values
of individual test IDs that the vehicle has performed with test limits.

* Freeze frame; Standard data stored by the vehicle at the instant it set a diagnostic trouble code (DTC).
* Diagnostic trouble code reader; Displays “P” codes, including manufacturer specific codes reported under mode 3.

o Automatic or manual code
definition lookup (all standard Obd II codes and most manufacterer
specific dtc).

o Ability to enter any arbitrary code for lookup purposes.

o Ability to periodically poll
for active trouble codes and malfunction indicator lamp status while
simultaneously monitoring other types of data.

* Pending trouble codes: These are similar to normal
trouble codes, but they are set after a single driving cycle, and
usually before the check engine light is illuminated. Useful after
repair work has been finished.

* Clear function; Requests vehicle to clear its
diagnostic trouble codes, on board test results, and freeze frame data.

* DataLogger; Optionally records and reads back most raw data on disk drive.

o Timetag option to periodically insert computer time into data stream.

o Place Markers can be inserted into file to facilitate locating the same position later.

o Playback functions: Sequential
(single step or continuous), Jump to record numbers or place markers,
rewind.

* Printout; Option to send most data to the default system printer.

* Mileage monitor; Computes miles per gallon
(instantaneous and averaged) as well as cumulative fuel used and
distance travelled. Currently calibrated for gasoline engines only.

* Simulate mode; Runs without interface attached. Useful to explore and become familiar with the program.

EcuFlash 1.34

FlashBooster 1.54

Galleto 1250 (Software + Hardware)

KWP2000 (Software + Hardware)

MPC 5xx BDM Programmer 3.1.0.1236 (Software + Hardware)

for tuning virtually any manufacturer, meant to be used in conjuction

with ECU flash and dump utilities. Enginuity will give you full

control over timing, fuel, boost and many other parameters in your

ECU, competing with very expensive and proprietary software. Enginuity

will remove your need for piggyback systems designed to control these

functions, and, in most cases, work as well as or better than any

stand alone engine management. Reflashing your stock ECU also has the
added benefit of a manufacturer tested base map, giving you top notch

performance and saving time tuning idle and low throttle applications

while retaining all of the benefit of the research and development

manufacturer’s spend millions of dollars on.

OBD SCAN TECH (NISSAN) 1.29

Conzult Freeware

OBD Scan Tech (OBD II Generic) 1.17

This software only works with vehicles from 1996 (mandated in USA, 2000 in Europe) up to 2005 and have the following protocols.

*** J1850 VPW

*** J1850 PWM
*** ISO-9141

*** KWP2000

* CAN Protocol Is Not Supported At This Time And They Are Found On Newer Models.

This software only supports the following OBDII Hardware Protocol and one of any

from the list is REQUIRED to communicate with the OBDII ECU.

Hardware Protocol

Website Information

*** OBDSCAN (Tested With Firmware 2.16)         http://www.ghg.net/dharrison

*** BR3 (ALL Protocols Supported except
CAN)           http://obddiagnostics.com

*** JEFF (ISO-9141 And KWP 2000 Protocols)      http://www.planetfall.com/~jeff/obdii/

Software does not support most of the features (such as Mode 5,6 or
Extended Data Parameters and possibly) from using OBDSCAN PROTOCOL
CONVERTER.

OPEL Diagnostic TECH2

Motronic Diagnost 1.21

PCMSCAN supports 1996* and newer passenger vehicles whether it be US, Asian, or European.

Supported OBD-II protocols: SAE-J1850 (PWM and VPW), ISO-9141, ISO-14230 (KWP2000), and ISO-15765 (CAN).

*1996 is the year the OBD-II system was standardized for passenger
vehicles sold in the United States. In Europe, this was standardized in
2001 for gasoline vehicles and 2004 for diesel passenger cars. Please
verify that your vehicle is OBD compliant before purchasing.

PCMSCAN Features

* Highly configurable realistic looking gauges.

* Gauges can be moved, resized, and laid out to resemble your own dashboard.

* Virtual dashboard layouts can be loaded and saved from pre-existing templates or your own custom creations.

* Gauges can be configured to report the minimum, maximum, and average values of the parameter being monitored.

* Highly configurable graphs allow simultaneous graphing of up to 8 parameters per graph.

* Tables can be placed on virtual dashboards and customized to report any parameters you want.

* Maps can be placed on virtual dashboards and customized to display a full 3D view of any desired parameters.
* You can set up an unlimited number of gauges, graphs, tables, and maps on your virtual dashboard.

along with providing manufacturer-enhanced diagnostics for many vehicle types. It gives you access not

only to the powertrain systems, but also ABS, airbag, and other proprietary systems that would otherwise

require expensive dealer tools to work with. It allows viewing, charting, logging and playback of diagnostic

data in real time via the vehicle’s OBD-II diagnostic data port. It also allows viewing of vehicle Diagnostic

Trouble Codes (DTC’s), Freeze Frame data, and other vehicle information. ScanXL� supports 1996* and newer

passenger vehicles whether it be US, Asian, or European.

Supported OBD-II protocols: SAE-J1850 (PWM and VPW), ISO-9141, ISO-14230 (KWP2000), and ISO-15765 (CAN).

Visit our user forum for discussion and information about ScanXL�, product features, and new releases.

*1996 is the year the OBD-II system was standardized for passenger
vehicles sold in the United States. In Europe, this was standardized in
2001 for gasoline vehicles and 2004 for diesel passenger cars. Please
verify that your vehicle is OBD compliant before purchasing.

* Is fully compatible with all VW, Audi, Seat and Skoda
models through 2007, including models using a direct CAN connection for
diagnostics.
* Has a database of more than 9000 fault-codes and measuring-block texts.

* Can use the new 7-Digit PIN/SKC codes to match new keys in all immobilizer equipped VW/Audi/Seat/Skoda models.

* Allows you to view,  log, and graph 3 groups of Measuring Blocks at once

* Can access all control modules which require
proprietary VAG modes running the new KWP-2000 protocols (2001+ Teves
Mk.60 ABS, numerous 2002+ modules)

* Can display critical timing information on TDI engines in graphic form